The FC-22ETH is a bidirectional RS-232 (RS-485) and Ethernet signal converter. It allows to control 2 devices with RS-232 (optionally, one with RS-485 and one with RS-232) via Ethernet LAN. Supports simultaneous communication of up to 40 client devices on the part of the LAN.

Technical specifications

Ports	1 - Ethernet, RJ45 connector (socket) 1 - RS-232, terminal block 1 - RS-232 / RS-485, terminal block 1 - USB (service), MINI type -B (socket)
Serial interface baud rate	Up to 115200 bits / s
Communication via serial interface	Complete-duplex, TXD, RXD, GND signals are supported.
Control	Port Selection Button, RS-485 Terminator Switch, DHCP Selection Buttons and Reset to Factory Settings
Indication	Power, Ethernet work, port status and DHCP
Operating temperature range	0…+40 °C
Storage temperature range	−40…+70 °C
Relative humidity	10 ... 90 % (without condensation)
Power	5 V, 200 mA
Size (WxDxH)	121 x 69,9 x 24,7 mm
Case size	TOOLS
Rackmount	Optional adapter
Weight	0,48 kg