FC−404Net is a four−input/four−output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.

Technical specifications

Inputs	4 - Balanced Audio System, Terminal Block
Outputs	4 - Balanced Audio System, Terminal Block
Ports	1 - Dante, RJ45 connector (socket) 1 - RS-232, terminal block
Frequency range	20 Hz - 20 kHz (+1 dB)
phantom power	48 V ± 10 %
THD + N	< 0,008 % (1 kHz)
Maximum input level	3.2 V (from peak to peak) with input and output gain 0 dB
Signal to Noise Ratio	>85 dB
CROSSTALK	< 80 dB
Input impedance	10 Com (Balance Connection)
Output impedance	50 Ohm (Balance Connection)
Gain level	At the entrance: − 12 dB … +60 dB at the exit: +9 dB … − 80 dB
Operating temperature range	0…+40 °C
Storage temperature range	−40…+70 °C
Relative humidity	10 ... 90 % (without condensation)
Indication	Power, clipping (in / out), availability of Dante network, connection status
Control	DIP switches, reset button to factory settings
Power	5 V, 850 mA
Size (WxDxH)	188 x 120 x 26 mm
Case size	MegaTOOLS
Rackmount	Optional adapter
Weight	0,41 kg