GLOBALCOM IP100 Controller with EDU Software and Additional 16Ch x 16Ch Dante, VoIP, and IEDNet+. Includes 2 Hours of Configuration Support

Inputs	2 - linear: Balanced audiomono, terminal block 1 - microphone, minijack connector 3.5 mm (socket) 8 - logical, terminal block
Outputs	1 - HDMI, type A (socket) 1 - VGA, D-sub HD15 connector (socket) 1 - for headphones, MINIJACK connector 3.5 mm (socket) 8 - relay , terminal block
Ports	2 - Dante, RJ45 connector (socket) 1 - Ethernet, RJ45 connector (socket) 2 - USB 2.0, type A (socket) 2 - USB 3.0, type A (socket)
Supported Permissions	HDMI: up to 1600x1200 (UXGA) VGA: up to 2048x1536 75 Hz (QXGA)
Number of Dante channels	16 input, 16 weekends
Dante Bandwidth	100/1000 Mbps
Relay	1 A at 30 V D.C., Form C (No / NC)
Maximum input level	Unbalanced entrances and outputs: − 6 dBN Balance inputs: &Plus; 14 dBN
Input impedance	47 com (non-balance)
CPU	64 BIT, INTEL® Quad Core ™
Audio sampling rate	48 kHz
Frequency range	20 Hz - 20 kHz
Dynamic Range	90 dB (a-weighted)
Common-mode rejection ratio (CMRR)	85 dB (60 Hz - 20 kHz)
THD	< 0.01 % (1 kHz, &Plus; 6 DBU)
digital processing	24-bit ADCs
Ethernet Transfer Rate	10/100/1000 Mbps
Indication	Two-Strong LCD Display on the front panel
Cooling	Forced (fans)
Power	12 V
Power consumption	36 W Max.
Size (WxDxH)	438 x 197 x 44 mm
Rackmount	1U
Weight	3 kg
Safety	UL Std. 60950, CAN/CSA Std. 60950