15 Input x 16 Output DSP Audio Processor w Dante™

Inputs	16 - Microphone / linear: Balanced audiomono, terminal block 4 - logical, terminal block
Outputs	16 - Linear: Balanced Audiomono, terminal block 2 - relay, terminal block
Ports	2 - Dante, RJ45 connector (socket) 1 - Ethernet, RJ45 connector (socket)
Gain level	− 40 … +15 dB (step 0.25 dB) at the inlet and output
Frequency range	20 Hz - 20 kHz (± 0.1 dB)
Maximum signal level	+20 dBu
Input impedance	>10 kOhm
Output impedance	50 ohm
phantom power	48 V
Dynamic Range	110 dB (unfastened)
THD	< 0.002 % (1 kHz, +4 DBU)
Common-mode rejection ratio (CMRR)	>100 dB (50 Hz - 10 kHz)
CROSSTALK	< −100 dB
Number of Dante channels	16 input, 16 weekends
digital processing	40-bit DSP floating point 24-bit ADC / DAC (48 kHz)
Progress Delay	3 ms.
Equalizer	Parametric, graphic, anti-feedback (feedback suppression)
Filters	Bessel, Butterworth, Linkvitz - Riley
Cutting steepness	6 … 48 dB per octave in increments of 6 dB
Insertion delay	10 … 2000 ms, customizable
Signal generator	White noise, pink noise, sinusoidal signal, swipe-tone
Setting memory	70 presets
Indication	Power supply, the presence of a signal for each input / output, the peak level for each input / output (− 3 dB before clipping), network data
Power	Network ~ 90-240 V, 50/60 Hz
Power consumption	20 W
Size (WxDxH)	483 x 229 x 44 mm
Rackmount	1U