2 inputs/6 outputs Sharc based digital signal processor, RTA, SPLM, PRONET remote control.

Inputs	2 - Balanced audiomono, XLR 3-pin connector (socket) 1 - Microphone RTA, XLR 3-PIN connector (socket) 1 - digital AES / EBU audio, XLR 3-PIN connector (socket) 1 - PRONET network Ethercon RJ45 connector (socket)
Outputs	6 - Balanced Audiomono, XLR 3-PIN connector (fork) 2 - Passing out analog inputs: Balanced audiomono, XLR 3-PIN connector (fork) 1 - PRONET network Ethercon RJ45 connector (socket)
Ports	1 - USB, Type B (Socket)
Input impedance	>10 kOhm
I/O type	Electron Balancer
Gain level	At the entrance: − 30 ... + 6 dB (step 0.2 dB) at the output: − 30 ... + 15 dB (step 0.2 dB)
Maximum signal level	+20 dBu
Frequency range	20 Hz - 20 kHz (± 0.5 dB)
Dynamic Range	>110 dB (unfastened, 20 Hz - 20 kHz)
THD	< 0.015% (1 kHz, +18 DBU)
Filters	Bessel, Butterworth, Linkvitz - Riley
Cutting steepness	6, 12, 18, 24, 48 dB per octave
Insertion delay	600 ms maximum increments of 21 μs
digital processing	40-bit DSP floating point
ADC bit depth	24 bits
DAC bit depth	24 bits
DAC/ADC latency	1.68 ms (analog input - analog output, 48 kHz)
Audio sampling rate	48 kHz
Control	USB (via Pronet protocol)
Front display	LCD, 192x32, graphic
Power	Network ~ 80-250 V, 50/60 Hz
Size (WxDxH)	482 x 295 x 44 mm
Weight	4,1 kg

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Enter the code in the box below

PC260

Qty

Tags: PC260