The PA-120Net is a power amplifier with a three-band equalizer and an HF filter, as well as overheating and short circuit protection. Power of the amplifier is 2x60 W at load 4 or 8 ohms, 120 W when connected over 70/100 V. The amplifier has balanced and unbalanced inputs, Dante interface and sleep mode. It is controlled and its state is monitored via RS-232 or Ethernet (web interface).

Technical specifications

Inputs	1 - Dante, RJ45 connector (socket) 1 - linear: Balanced audio player, terminal block
Outputs	1 - reinforced loudspeakers, terminal block 1 - linear: balance sheet audio, terminal block
Ports	1 - Ethernet, RJ45 connector (socket) 1 - RS-232, terminal block
Gain class	D
output power	2x60 W - 4/8 ohms 1x120 W - 70/100 V
Gain level	Stereo mode: 26 dB Mono mode: 32 dB
input sensitivity	0.3 V (− 10 dBV)
Frequency range	20 Hz - 20 kHz (± 0.1 dB)
Signal to Noise Ratio	80 dB (20 Hz - 20 kHz)
Dynamic Range	119 dB
THD + N	0,003 % (1 kHz, 1 W)
Second harmonic coefficient	0.08 % (6.67 kHz, 75 watts RMS, 4 Ohm)
Number of Dante channels	2 entrances
Cooling	Forced (fans)
Housing material	aluminum
Operating temperature range	0…+40 °C
Storage temperature range	−40…+70 °C
Relative humidity	10 ... 90 % (without condensation)
Power	Network ~ 85-265 in
Power consumption	195 W
efficiency	89 %
Size (WxDxH)	214,6 x 163 x 44 mm
Weight	1,1 kg
Certification	CE, FCC, RoHS, WEEE