Amplifier, DSP 4X100W@70.7/100V 1RU

Technical specifications

Inputs	4 - Balanced audiomono, terminal block 4 - GPI / O, terminal block 1 - slot for an optional extension card (2xMic / Line + 2XAUX or 4XDANTE)
Outputs	4 - reinforced loudspeakers, terminal block
Ports	1 - Ethernet, RJ45 connector (socket)
Gain class	AB BASH
output power	4x50 W - 4 ohms 4x75 W - 8 ohms 4x100 W - 70 V 4x100 W - 100 V 2x100 W - 70 V + 2x50 W - 4 ohms 2x100 W - 100 V + 2x50 W - 4 ohms 2x100 W - 100 V + 2x75 W - 8 Ω 2x100 W - 70 V + 2x75 W - 8 ohm
Frequency range	20 Hz - 20 kHz
Logic input	EURO terminal block type Phoenix, step 3.5 mm, 6-pin: « land », +10 V post., C1, C2, C3, C4
digital processing	24-bit DSP, 48 kHz
THD	0,2 %
Signal to Noise Ratio	>100 dB (a-weighted)
CROSSTALK	73 dB (1 kHz), Channels 1-2 and Channels 2-1, Channels 3-4 and Channels 4-3
Protection	KZ, overheating, overload for current, excess / drop input voltage
Adjustments and functions	DSP parameters: PVCH / FNH (steepness of the decline, cutoff frequency - one on the channel), equalizer (5 parametric filters per channel), delay (up to 60 ms per channel), limiter (up to 12 dB per channel); GPI / O: Muth, Remote Signal Management
Indication	Power, standby, output signal, signal (each channel), overload (each channel), outputting output
Power	Network ~ 110-230 V, 50/60 Hz
Power consumption	160 W (4 ohms) and 215 W (70 c) environments, all channels are active 486 W (4 Ohm) and 710 W (70 V) Max., All channels are active
Standby power consumption	4 W in sleep mode 18 W in standby mode / APD 40 W during inaction
Size (WxDxH)	483 x 394 x 45 mm
Rackmount	1U
Weight	5,92 kg