C-UNIKat

Quality Construction — 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket.
Optimized for Kramer Hardware — Use with any of Kramer’s wide range of twisted pair digital transmitter–receiver sets (DGKat™ and HDBaseT).
High–Quality Shielded RJ–45 Connectors — 50u gold plated contacts.

Connector Type A	RJ45 / 8P8C (Male)
Connector Type B	RJ45 / 8P8C (Male)
Twisted pair category	CAT6A U/FTP
Number of conductors	4 x 2
Inner conductor	1 x 0,56 mm
Conductor material	Annealed Copper
AWG	23
Insulation material	Polyethylene film-porous film high density (Skin-Foam-Skin HDPE)
Insulation diameter	1,33 mm ±0,1 mm
Insulation color	orange, orange with white green, blue with white blue, green with white brown, brown with white
Screen common	No
Ground wire	0.4 mm ± 0.1 mm; 90 % tinned copper
Outer shell material	Low-house polymer without halogen (LSHF)
Outer shell diameter	7,2 mm ±0,2 mm
Outer shell thickness	≧ 0,5 mm
Outer shell color	Blue
Electrical parameters
Wave impedance	100 ohms ± 15 ohm
Signal Propagation Rate (VOP)	0,74
Working pair capacity (electrical)	≦ 42 PF / M
Capacitive asymmetry of the pair relative to the "ground"	≦ 1500 PF / km
Conductor resistance per 1 km	79,8 Ohm max.
Ohmic asymmetry	< 1,5 %
Insulation resistance per 1 km	>5   gom
Rated voltage	30 V
Performance characteristics
Minimum bend radius	60 mm when mounting 50 mm during operation
Operating temperature range	−20…+60 °C
Storage temperature range	0…+50 °C
Temperature range during installation	0…+50 °C
Compliance
Flame Propagation Test	IEC 60332-1
Smoke Density Test	IEC 61034
Halogen Acid Gas Emission Test	IEC 60754
Cable standards	ANSI TIA/EIA-568A, ISO/IEC 11801